Nexus 5 and the Airave

TL;DR

My Nexus 5 was showing low bars even when right next to my Airave. The problem was the Nexus was set up for LTE network, and the Airave is 3G. Thankfully I was able to change the network type of the Nexus by going to Settings > More… > Mobile networks > Preferred network type > 3G. Full bars again!

Story

I spent part of my tax refund on a Nexus 5. My Samsung Transform Ultra just couldn’t keep up with my demands.

The Nexus is so shiny and a lot bigger.

I found I was having a problem making calls and getting text messages. The bars were almost down to nothing, and I was sitting right next to my Airave.

I checked all the settings I knew to check on the phone, but it was still new to me. I even checked the Airave settings.

Thankfully, a Google search led me to this forum on Sprint’s community website.

On your phone, go into Settings > More… > Mobile networks > Preferred network type > 3G.

Once I did that, I had full bars again.

I had tried the other recommendations like updating the PRL (under Mobile Networks > Carrier Settings), but it did not work for me.

I don’t do a lot of downloading when I am away from a WIFI signal, so sticking with 3G instead of LTE is fine with me.

MMC cannot open the file C:\Windows\system32\eventvwr.msc

I ran into this error when I tried to run Event Viewer in Windows 7.

—————————
Microsoft Management Console
—————————
MMC cannot open the file C:\Windows\system32\eventvwr.msc.

This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.

I ran “sfc /scannow” in case something was wrong with the eventvwr.msc file, but the test came back clean.

I knew the sufficient access rights could not be the problem because I have admin rights.

I googled.

From the first google result, I followed methods 1 & 2, but got the same error. I did not bother with method 3 because it said to check the Event Viewer for the cause. Somebody was copy-and-pasting!

The second result held the answer to my problem. Granted the solution was for Windows Small Business Server, but it worked for Windows 7, too.

  1. Click the Start button.
  2. In the “Search files and Programs” box, type %appdata%\Microsoft\mmc and press the Enter key. The File Explorer window should open.
  3. Delete the files in the folder, or move them to another folder like I did just in case I was reading bad advice.
  4. Try to open Event Viewer again.

Event Viewer successfully opened!

 

 

MMC cannot open the file C:\Windows\system32\eventvwr.msc

I ran into this error when I tried to run Event Viewer in Windows 7.

—————————
Microsoft Management Console
—————————
MMC cannot open the file C:\Windows\system32\eventvwr.msc.

This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.

I ran “sfc /scannow” in case something was wrong with the eventvwr.msc file, but the test came back clean.

I knew the sufficient access rights could not be the problem because I have admin rights.

I googled.

From the first google result, I followed methods 1 & 2, but got the same error. I did not bother with method 3 because it said to check the Event Viewer for the cause. Somebody was copy-and-pasting!

The second result held the answer to my problem. Granted the solution was for Windows Small Business Server, but it worked for Windows 7, too.

  1. Click the Start button.
  2. In the “Search files and Programs” box, type %appdata%\Microsoft\mmc and press the Enter key. The File Explorer window should open.
  3. Delete the files in the folder, or move them to another folder like I did just in case I was reading bad advice.
  4. Try to open Event Viewer again.

Event Viewer successfully opened!

 

 

MMC cannot open the file C:\Windows\system32\eventvwr.msc

I ran into this error when I tried to run Event Viewer in Windows 7.

—————————
Microsoft Management Console
—————————
MMC cannot open the file C:\Windows\system32\eventvwr.msc.

This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.

I ran “sfc /scannow” in case something was wrong with the eventvwr.msc file, but the test came back clean.

I knew the sufficient access rights could not be the problem because I have admin rights.

I googled.

From the first google result, I followed methods 1 & 2, but got the same error. I did not bother with method 3 because it said to check the Event Viewer for the cause. Somebody was copy-and-pasting!

The second result held the answer to my problem. Granted the solution was for Windows Small Business Server, but it worked for Windows 7, too.

  1. Click the Start button.
  2. In the “Search files and Programs” box, type %appdata%\Microsoft\mmc and press the Enter key. The File Explorer window should open.
  3. Delete the files in the folder, or move them to another folder like I did just in case I was reading bad advice.
  4. Try to open Event Viewer again.

Event Viewer successfully opened!

 

 

Use Airrave with Ting to get better cellphone reception

Use Airrave with Ting to get better cellphone reception

So I really like my cellphone service, Ting.

One problem I have had isn’t really with Ting, it’s with Sprint, who Ting uses for their network. That one problem is that as excellent as the reception is everywhere else in town, the worse place seems to be my neighborhood.

Technically, we are in the coverage area, but I have to go outside or stay perfectly still in one corner of my house to keep a call from dropping.

I tried to fix the solution by buying a Zboost Metro which is a powered signal booster that connects to a window-mounted antenna . I think it did not work for me because there are too many obstructions between my house and the cell phone tower. I paid $140 for it.

Thankfully, the solution comes in the form of the Airvana Airrave device. It acts as my own personal cell tower.

airrave_post

I just had to hook it up to my internet in between my cable modem and my router, then called Ting to get them to activate the device for me (activation was free).

The cost of a brand new Airrave is around $200. You can buy it from Sprint for $100 at the time of this writing, but you have to call to order it. A refurbished model at Ting is $120 (its availability varies). I bought mine on Ebay for less than $50. Ting was still very cool about activating for me.

I have had my Airrave for a few months now and I’m very happy with it. I get and make calls in my basement, which was impossible before.

It only takes up about a 12” by 3” spot on my shelf.

One feature some may find annoying is that your phone speaker will beep 3 times when receiving or making a call. That is there to let you know you are connected through the Airrave.

You can use it for VOIP, and there are connections for it, but I have no need for that function, so I have not tried it.

Is the Airrave right for you? If

  • your service uses the Sprint network
  • you have low reception at home
  • and you have high-speed internet

then, yes, you should get the Airrave.

How save money using Ting

How save money using Ting

I have already mentioned how I am saving over half what I was spending while with Spring since switching to Ting. Here’s how to save more.

Turn off your data when you are not using it.

I installed this free widget on my phone: Data Switch

It is a simple widget that you tap to turn on and off your 3G/4G data connection. Since Ting charges you depending on how much of their service you use, why use more than you have to?

Sure you could turn off sync, but there are still apps you may have running in the background that may still try to access the internet.

This way, those apps can only access the internet while you are connected to WiFi unless you turn the switch on again. This saves on battery, too.

 

Ting – The best cell phone service provider

Ting – The best cell phone service provider

Last year I switched from Sprint to Ting. The switch did not go exactly as I thought it would, but the result was better than I had imagined.

I saved more than half than what I was paying Sprint and got a new phone relatively cheap.

I hit a couple of snags, but considering how much money I saved, it was worth it.

Get Ting!

Why I switched

I was using Sprint’s Everything Data Plan with 450 “Anytime” minutes which was costing me about $80 a month including the additional fees and taxes. A new contract with Sprint for that same plan is now $10 more.

I first learned about Ting through their parent company, Tucows, who made their name as a domain name registrar. My past experience with another of their companies, OpenSRS was good, so knew Ting was going to be good, too. Ting uses Sprint’s network, so I knew my coverage would not change.

As I looked at the plans and used their savings calculator, I found I could save half of what I spending with Sprint, and I was sold.

The only thing keeping me switching right away was my contract with Sprint, which, at the time, would not expire for another couple of months. Plus, I kept reading on their blog about their Bring Your Own Sprint Device, or BYO(S)D, program which was still under development.

Finally the day came when my Sprint contract had expired, and I was also accepted into the beta of the BYO(S)D program. I had an LG Optimus S (LS670) I was planning on using, but I hit a snag. The BYO(S)D program would only work with inactive devices, and mine was still active with Sprint. I did not want to go without a phone for any amount of time and wanted to keep my number, so the BYO(S)D program was out, but I was still determined to move to Ting.

So I looked at Ting’s device offerings. They had a refurbished Samsung Transform Ultra for $79 which was (1) better than my current LG Optimus S, and (2) so inexpensive, the money I would save by switching to Ting would pay for it in a few months.

So I ordered the Samsung phone, and used Ting’s online service to port my number and activated the phone.

For the past three months of billing, I have not been charged more than $35 for each month. I’m happy so far.

Now that I have a new phone, if I wanted, I think could still take part in the BYO(S)D with my old phone since it is now inactive. So I could have a second phone with my plan for only $6/month more, and they would share the minutes, messages and data.

[big_button color=”blue” url=”http://hecktech.net/go/tingswitch” desc=”Click here to get $25 off the purchase of a device”] Get Ting! [/big_button]

Before you take the plunge

Some things to note before you switch:

Google Voice – I use Google Voice for my voicemail. Ting makes this easy to set up since you just need to enter your Google Voice number as the “Forward if busy” and “Forward if unanswered” number. The only problem I have had so far is I have not been able to get texts to forward to Google Voice as I did with Sprint. The benefit here was that the texts would show up in my email if I was somewhere where I did not have service, but still had WIFI. It was also good for keeping an archive of texts. Since moving to Ting, I solved the archive problem by using the “SMS Backup” app.

Samsung Transform Ultra glitch – If I use the stock SMS app, the date/time stamp on incoming messages is an hour ahead. Using the Go SMS Pro app fixed that problem.

SD card not included – An SD card was not included with my refurbished Samsung Transform Ultra and I don’t think the new ones do either, so I highly recommend you buy one separately.

Battery life is not so great on the Samsung Transform Ultra.

Despite the problems with that particular phone, Ting is still great.

Get Ting!

 

How to fix HP Deskjet D1455 blinking light

How to fix HP Deskjet D1455 blinking light

I needed to print something, and my printer had been unplugged for a month or two. I plugged it back in, let it do its warm-up stretches, and proceed to print my document.

But nothing happened. The green power LED on the printer just blinked at me.

Go to the TL;DR

I had installed the printer by just plugging it in to my Windows 7 computer without installing any of the HP software. Before, it had printed fine, so I did not see a need. But now I needed to install the software so that it would tell me what was wrong.

I went to hp.com, clicked the “Drivers and Software” link, typed in “Deskjet D1455”, selected “Windows 7 64-bit”, and a list of software came up under “Step 2”. Under “Driver – Product Installation Software”, I clicked the Download button to download the 137.7 MB file. Then I ran the program to install it.

On installation completion, I right-clicked the “Digital Imaging Software” icon in my taskbar, moused-over my printer name, and selected “Display Status”.

The “Solution Center” window came up and said something was wrong with my ink cartridges. But it did not say exactly what.

I knew there was plenty of ink, but I thought I would try to remove both of them and pop them back in again. I closed the lid, but still nothing.

Maybe something is wrong with just one of them and causing the other to glitch? That thought led me to try to open the lid, take out both cartridges, install just one (the color one), and close the lid.

Success! The Solution Center window reported the color cartridge was present and had plenty of ink.

I installed the black cartridge, and again success! It appeared in the window as also having plenty of ink.

With all systems go, I was able to print without a problem.

TL;DR

Symptom: Green light is flashing/blinking on your HP Deskjet D1455 (or Deskjet D1400 family printer)

Solution:

  1. If you have not already, install the driver/monitor software from HP.com
  2. Open the “Display Status/Solution Center” window to monitor the printer’s status.
  3. If it says the ink cartridges have a problem, try removing both cartridges and closing the lid. Wait until the “Solution Center” window says the cartridges are missing.
  4. Open the lid and install just one of the cartridges and close the lid. Watch the “Solution Center” window to see if it worked.
  5. Repeat for the other cartridge.

If this does not work, you may have to replace the cartridges.

The important point here is that sometimes you need the actual software from the printer manufacturer to get the status of your printer, especially if you have an inexpensive model like mine that does not have an LCD screen to tell you what is wrong.

If you find the monitor program is eating too much of your RAM, you can always close the program.

Google Apps ends free sign-ups

Google Apps ends free sign-ups

Google has ended its free sign-ups for Google Apps today. Before, anyone with a domain name could set up a free Google Apps for their domain name as long as they would have 10 or less users.

If you signed up your organization for a free Google Apps account in the past, it will stay free – unless you decide to upgrade.

501(c)(3) non-profit groups with less than 3000 users can still sign up for Google Apps for free through Google’s site for non-profits.